To search our publications, use Reference Manager
Publications from 2000-2004
Brookfield, D. J., W. Li, B. Rodgers, J.E. Mottershead, T.K. Hellen, J. Jarvis, R. Lohr, R. Howard-Hildige, A. Carlton, & M. Whelan, 2001. "Material Properties From Small Specimens Using the Punch and Bulge Test", The Journal of Strain Analysis for Engineering Design, vol. 34, no. 6, pp. 423-435
Campbell, T., R. Cole, & M. Davies, 2003. "The Effects of Intramural Pressure on the Arterial Wall at the Distal Anastomosis", Dublin.
Christmas, S. P., D.A. Jackson, P.J. Henderson, L. Zhang, I. Bennion, T. Dalton, P. Butler, & R. Kenny, 2000. "High-Resolution Vibration Measurements Using Wavelength-Demultiplexed Fiber-Fabry-Perot Sensors", In: 14th International Conference on Optical Fibre Sensors, 7 ed., SPIE, Venice, pp. 744-749.
Cole, R., M. Davies, & J. Punch, 2001. "A Board Level Study of an Array of Ball Grid Components Part I: Aerodymanic Measurements", In: 34th ASME National Heat Transfer Conference NHTC 2001, 1 ed., ASME, New York, USA, p. 8.
Cole, R., T. Dalton, J. Punch, M. Davies, & R. Grimes, 2001. "Forced Convection Board Level Thermal Design Methodology For Electronic Systems", ASME Journal of Electronic Packaging, vol. 123, no. 2, pp. 120-126
Cole, R., T. Dalton, J. Punch, M. Davies, & R. Grimes, 2001. "A Board Level Thermal Design Methodology for Electronic Systems", ASME Journal of Electronic Packaging Cole, R. & M. Davies, 2002. "Numerical Analysis of an Array of Ball Grid Components.", In: Sixth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, ITherm, San Diego, pp. 61-68.
Cole, R., M. Davies, & P. Grace , 2002. "On the Role of Intramural Stress and Strain in the Restenosis of Femoral Artery Bypass Grafts", In: 2002 World Congress of Biomechanics, 1 ed., American Society of Biomechanics, Calgary, Canada.
Cole, R., M. Davies, & J. Punch, 2002. "A Board Level Study of an Array of Ball Grid Components", ASME Journal of Electronic Packaging Cole, R., M. Davies, & J. Punch, 2003. "A Board Level Study of an Array of Ball Grid Components - Aerodynamic and Thermal Measurements", ASME Journal of Electronic Packaging, vol. 125, no. 4, pp. 480-489
Cole, R., T.M. Campbell, & M.R.D. Davies, 2003. "Pressure Induced Stresses and Strains in a Simulated Femoral Artery Bypass Graft Junction", In: ASME 2003 International Mechanical Engineering Congress & Exposition, 1 ed., ASME, New York.
Cole, R., M. O'Donnell, T. Campbell, & M. Davies, 2004. "On the Incompressible Nature of Arteries - Experiment and", Anaheim.
Curran, K., S. Colin, L. Baldas, & M. Davies, 2004. "Unstable Coalescence in the Mixing of Microcapillary-Suspended Aqueous Droplets in Silicone Oil", Toulouse, France.
Curran, K. & M. Davies, 2004. "Spectral Intensity Mapping and Analysis of Dyed Microflows".
Curran, K., S. Colin, L. Baldas, & M. Davies, 2004. "Liquid Bridge Instability Applied to Microfluidics", Journal of Microfluidics and Nanofluidics Curtin, D., D. Newport, & M. Davies, 2003. "Micro-PIV Measurements in a Mini-Channel", In: 6th Annual Sir Bernard Crossland Symposium, NUI, Galway.
Davies, M., D. Newport, & T. Dalton, 2000. "On Gaseous Free Convection With Well Defined Boundary Conditions", ASME Journal of Heat Transfer, vol. 122, no. 4, pp. 661-668
Davies, M., R. Cole, & J. Punch, 2001. "A Board Level Study of an Array of Ball Grid Components Part II: Thermal Measurements", In: 2001 34th ASME National Heat Transfer Conference, 1 ed., ASME, New York, USA.
Davies, M. R. D., F.K. O'Donnell, & A.J. Niven, 2000. "Turbine Blade Entropy Generation Rate, Part 1: The Boundary Layer Defined", Munich.
Davies, M. R. D. & T.M. Dalton, 2000. "A New Approach to Teaching Thermofluids Dimensional Analysis", International Journal of Mechanical Engineering Education, vol. 28, no. 2, pp. 163-173
Davies, M. R. D. & E. Breathneach, 2000. "Operation and Preliminary Measurements From a New Transonic Wind Tunnel", Florence.
Davies, M. R. D., R. Cole, & J. Lohan, 2000. "Factors Affecting the Operational Thermal Resistance of Electronic Components", ASME Journal of Electronic Packaging, vol. 122, no. 3, pp. 185-191
Donovan, J., V. Loll, & J. Punch, 2003. "Graphical Analysis and Guidelines for Step-Stress Testing", In: Annual Reliability and Maintainability Symposiun 2003, IEEE, New York, USA, pp. 528-533.
Eason, C., T. Dalton, C. O'Mathúna, M. Davies, & O. Slattery, 2004. "Direct Comparison Between a Variety of Microchannels Part 1: Channel Manufacture and Measurement", In: ASME 2004 Microchannels and Minichannels Conference, 3 ed., ASME, New York, USA, pp. 79-88.
Eason, C., T. Dalton, C. O'Mathúna, M. Davies, & O. Slattery, 2004. "Direct Comparison Between a Variety of Microchannels Part 2: Experimental Description and Flow Friction Measurement", In: ASME 2004 Conference on Microchannels and Minichannels, 3 ed., ASME, New York, USA, pp. 79-88.
Eason, C., T. Dalton, C. O'Mathúna, O. Slattery, & M. Davies, 2004. "Fluid Flow and Heat Transfer Performance Testing on Microchannels Using a Novel Modular Test System", Côte d'Azur.
Egan, V., T. Dalton, D. Newport, M. Davies, & M. Whelan, 2002. "An Investigation into the Heat Transfer and Fluid Flow Around a Circular Cylinder in Buoyancy Assisting Cross Flow", New Orleans.
Garvey, J., D. Newport, & T. Dalton, 2004. "Liquid Diffusion Measurement in Micro/Mini Channels From Full-Field Digital Phase Measurement Interferometry (PMI)", In: 2nd International Conference on Microchannels and Minichannels (ICMM 2004), ASME - American Society of Mechanical Engineers, New York, USA, pp. 429-437.
Griffin, P., M. Davies, T. Dalton, & J. Punch, 2001. "Particle Image Velocimetry Measurements of a Turbine Blade Wake and Suction Surface Boundary Layer", Limerick.
Griffin, P., J.J. Leahy, J. Punch, T. Galkin, E. Elonen, & O. Rusanen, 2004. "An Investigation of Sealant Materials for Display Modules Subjected to Temperature and Humidity Conditions", Presented at the 4th International IEEE Conference on Polymers and Adhesives in Microelectronics and Photonics, Portland, Oregon, USA, September.
Griffin, P. C. & M. Davies, 2002. "On the Use of Hot-Film Sensors in the Investigation of Fluid Dynamic Phenomena in the Near Wall Region", Cambridge.
Griffin, P. C. & M. Davies, 2002. "Aerodynamic Entropy Generation Rate in a Boundary Layer With High Free Stream Turbulence", Journal of Fluids Engineering - Transactions of the ASME, vol. 126, no. 4, pp. 700-703
Griffin, P. C., E. Walsh, M. Davies, & F. O'Donnell, 2002. "The Effect of Reynolds Number, Compressibility and Free Stream Turbulence on Profile Entropy Generation", In: ASME TURBO EXPO 2002: Turbomachinery, A ed., ASME, New York, USA, pp. 61-69.
Griffin, P. C. & M. Davies, 2004. "Aerodynamic Entropy Generation Rate in a Boundary Layer With High Freestream Turbulence", ASME Journal of Fluids Engineering, vol. 126, no. 4, pp. 700-703
Griffin, P. C. & M. Davies, 2004. "Aerodynamic Entropy Generation Rate in a Boundary Layer With High Free Stream Turbulence", Journal of Fluids Engineering, vol. 126, no. 4, pp. 700-703
Grimes, R., E. Kehoe, & M. Davies, 2001. "Experimental and Numerical Investigation of Mixed Convection Flow Over a Horizontal Cylinder and a PCB", Paris.
Grimes, R. & M. Davies, 2001. "Aerodynamic and Thermal Investigation into Axial Flow Fan Cooling of Electronic Systems Part II: Unsteady Flow Measurement", In: 2001 35th ASME National Heat Transfer Conference, 1 ed., ASME - American Society of Mechanical Engineers, New York, USA, pp. 131-138.
Grimes, R. & M. Davies, 2001. "PIV Measurements of Air Flow in an Electronic System With an Inlet Mounted Fan at Different Fan Operating Points", Limerick.
Grimes, R. & M. Davies, 2001. "Aerodynamic and Thermal Investigation into Axial Flow Fan Cooling of Electronic Systems, Part I: Measurement Techniques", In: 2001 35th ASME National Heat Transfer Conference, 1 ed., ASME - American Society of Mechanical Engineers, New York, USA, pp. 123-130.
Grimes, R., M. Davies, J. Punch, T. Dalton, & R. Cole, 2001. "Modelling Electronic Cooling Axial Fan Flows", ASME Journal of Electronic Packaging, vol. 123, no. 2, pp. 112-119
Grimes, R. & M. Davies, 2002. "The Effect of Fan Operating Point and Location on Temperature Distribution in Electronic Systems", In: 8th Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, 1 ed., IEEE - Institute of Electrical and Electronics Engineers, USA, pp. 677-684.
Grimes, R., E. Walsh, S. Kunz, M. Davies, & D. Quin, 2003. "Scaling the Performance of Micro-Fans", In: ASME 1st International Conference on Microchannels and Minichannels, 1 ed., ASME, New York, USA, pp. 895-902.
Grimes, R., D. Quin, E. Walsh, M. Davies, & S. Kunz, 2003. "A Theoretical and Numerical Investigation of the Scaling of Micro Fan Performance".
Grimes, R. & M. Davies, 2004. "Optical Measurements of Electronic System Air Flow and Temperature Distribution", Journal of Optics A: Pure and Applied Optics, vol. 6, no. 6, pp. 617-626
Grimes, R. & M. Davies, 2004. "Air Flow and Heat Transfer in Fan Cooled Electronic Systems", ASME Journal of Electronic Packaging, vol. 126, no. 1, pp. 124-134
Heaslip, G. & J. Punch, 2003. "Analysis of Experimental Shock and Impact Response Data of a Printed Wire Board", In: 2003 ASME International Mechanical Engineering Congress & Exposition, ASME, New York, USA, pp. 125-133.
Heaslip, G., J. Punch, B. Rodgers, & C. Ryan, 2004. "Board Level Drop Test Failure Analysis of Ball Grid Array Packages", In: Proceedings of the 2nd IPC/Soldertech International Conference on Lead Free Electronics, IPC, Amsterdam.
Heaslip, G., J. Punch, B. Rodgers, & C. Ryan, 2004. "Board Level Drop Tests Comparing Lead-Free and Eutectic Solder Interconnects on a BGA Package for Mobile ICT Applications", In: 2004 ASME International Mechanical Engineering Congress and R&D Exposition, 1 ed., ASME, New York, USA, pp. 353-362.
Heaslip, G. M. & J. Punch, 2002. "Accelerated Environmental Testing in Product Development", pp. 301-309.
Hradil, J., C. Davis, K. Mongey, D. Gray, T. Dalton, C. McDonagh, & B.D. MacCraith, 2002. "Temperature-Corrected Pressure Sensitive Paint Measurements for Aerodynamic Applications", In: Opto-Ireland 2002: Optics & Photonics Technologies & Applications, 2 ed., The International Society for Optical Engineering, Ireland, pp. 867-874.
Kehoe, E. & M. Davies, 2001. "P.I.V. Measurements of Low Reynolds Number Flow Instabilities Behind a Cylinder in Cross Flow", Limerick.
Kehoe, E., M. Davies, D. Newport, T. Dalton, M. Whelan, & C. Forno, 2001. "Measurements of Mixed Convection Heat Transfer About a Horizontal Cylinder", In: 2001 33rd ASME National Heat Transfer Conference, 1 ed., ASME, New York, USA, pp. 1537-1545.
Kehoe, E., R. Grimes, & M. Davies, 2002. "A Mixed Thermal Convection Criteria for a Printed Circuit Board", In: 2001 ASME International Mechanical Engineering Congress & Exposition, 1 ed., ASME, New York, pp. 95-103.
Kehoe, E., M. Davies, & D. Newport, 2003. "Mixed Convection Cooling of Horizontally Mounted Printed Circuit Board", IEEE Transactions and Packaging Technologies, vol. 26, no. 1, pp. 126-133
Mahon, R., P. Frawley, & M. Davies, 2002. "Investigation of Hot-Film Calibration for Entropy Generation Rate Calculations", Montreal.
Myllykoski, P., T. Reinekainen, & B. Rodgers, 2002. "Power Cycling Analysis of BGA Assemblies", In: EuroSimE 2002, 3rd International Conference on Benefitting From Thermal and Mechanical Simulation in Microelectronics, Paris, pp. 165-169.
Newport, D., M. Whelan, T. Dalton, & M. Davies, 2001. "A Novel Digital Moiré Subtraction Interferometer", Ananheim.
Newport, D., T. Dalton, M. Whelan, & C. Forno, 2001. "On the Thermal Interaction Between an Isothermal Cylinder and Its Isothermal Enclosure for Cylinder Rayleigh Numbers of Order 10(4)", ASME Journal of Heat Transfer, vol. 123, no. 6, pp. 1052-1061
Newport, D., T. Dalton, & M. Davies, 2002. "Free Convection Thermal Interaction Between 2D Components Mounted on a Vertically Oriented PCB", New Orelans.
Newport, D., D. Curtin, & M. Davies, 2003. "A Comparison of Micro-PIV Experiments in a Mini-Channel to Numerical and Analytical Solutions", New York.
Newport, D., J. Garvey, M. Whelan, T. Dalton, & V. Egan, 2003. "Development of Interferometric Temperature Measurement Procedures for Microfluid Flow", In: 2003 1st International Conference on Micro Channels and Mini Channels, New York.
Newport, D., J. Garvey, M. Whelan, T. Dalton, & V. Egan, 2004. "Development of Interferometric Temperature Measurement Procedures for Microfluid Flow", The Journal of Microscale Thermophysical Engineering, vol. 8, no. 2, pp. 141-154
Newport, D. T., D.M. Curtin, & M.R. Davies, 2003. "A Comparison of Micro-PIV Experiments in a Mini-Channel to Numerical and Analytical Solutions", Thermal Science and Engineering, vol. 11, no. 6, pp. 35-42
Nosenzo, G., M. Whelan, & T. Dalton, 2002. "Structural Integrity Analysis of Composite Structures Based on Optical Fibre Strain Sensing and Finite Element Model Updating", In: 5th International Conference on Vibration Measurements by Laser Techniques: Advances and Applications, 1 ed., SPIE, USA, pp. 224-233.
Nosenzo, G., M. Whelan, & T. Dalton, 2002. "Condition Monitoring of Vibrating Composite Structures Based on Optical Fibre Strain Sensing and Finite Element Model Updating", California.
Nosenzo, G., M.P. Whelan, & T. Dalton, 2003. "Damage Detection in Compostite Structures Based on Optical Fibre Strain Sensing and Finite Element Model Updating", In: Damage Assessment of Structures, 2 ed., Trans Tech Publications Ltd., Zurich, Switzerland, pp. 509-516.
O'Donnell, F. K. & M.R.D. Davies, 2000. "Turbine Blade Entropy Generation Rate, Part II: Measured Loss", Munich.
Quin, D., R. Grimes, E. Walsh, & M. Davies, 2004. "The Effect of Reynolds Number on Microfan Performance".
Rodgers, B., J. Punch, J. Jarvis, P. Myllykoski, & T. Reinekainen, 2002. "Finite Element Modelling of a BGA Package Subjected to Thermal and Power Cycling", In: ITHERM 2002. The Eighth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, 2002, 1 ed., IEEE, New Jersey, USA, pp. 993-1000.
Rodgers, B., 2003. "Getting the Lead Out". The Engineers Journal, vol. 57, no. 8, pp. 56-58.
Rodgers, B., J. Punch, C. Ryan, F. Waldron, & L. Floyd, 2004. "Experimental and Numerical Evaluation of SnAgCu and SnPb Solders Using a MicroBGA Under Accelerated Temperature Cycling Conditions", In: 2004 ASME International Mechanical Engineering Congress and R&D Expo, Anaheim, California.
Rodgers, P., V. Eveloy, & M. Davies, 2003. "An Experimental Assessment of Numerical Predictive Accuracy for Electronic Component Heat Transfer in Forced Convection - Part I: Experimental Methods and Numerical Modeling", ASME Journal of Electronic Packaging, vol. 125, no. 1, pp. 67-75
Rodgers, P., V. Eveloy, & M. Davies, 2003. "An Experimental Assessment of Numerical Predictive Accuracy for Electronic Component Heat Transfer in Forced Convection - Part II: Results and Discussion", ASME Journal of Electronic Packaging, vol. 125, no. 1, pp. 76-83
Ryan, C., J. Punch, & B. Rodgers, 2004. "SnAgCu Micro Ball Grid Array (BGA) Solder Joint Evaluation", In: Proceedings of the 2nd IPC/Soldertech International Conference on Lead Free Electronics, IPC, Amsterdam.
Ryan, C., J. Punch, B. Rodgers, S. O'Neill, E. Murphy, J. Donovan, & G. Heaslip, 2004. "An Investigation of the Lead-Free Surface Mount Soldering Process: Solder Joint Evaluation and Process Optimisation", In: 2004 ASME International Mechanical Engineering Congress and R&D Expo, Anaheim, California.
Ryan, C., S. O'Neill, J. Donovan, J. Punch, B. Rodgers, & E. Murphy, 2004. "Optimising Screen-Printing and Reflow Process Parameters", In: ITHERM 2004. The Tenth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, 2004, 1 ed., IEEE, New Jersey, USA, pp. 664-668.
Ryan, C., J. Punch, B. Rodgers, & L. Brown, 2004. "Using E-Learning to Assist Electronics Manufacturing Companies With the Transfer to Lead-Free Soldering", In: Proceedings of 21st International Manufacturing Conference, Limerick.
Walsh, E., 2002. The Measurement, Prediction and Minimization of Viscous Entropy Generation in Transitional Boundary Layers, University of Limerick, Ireland.
Walsh, E., M.R.D. Davies, & R. Myose, 2002. "An Entropic Minimization Technique for Turbine Blade Profiles", In: ASME TURBO EXPO 2002: Turbomachinery, A ed., ASME, New York, USA, pp. 199-206.
Walsh, E., R.Y. Myose, & M.R.D. Davies, 2002. "A Prediction Method for the Local Entropy Generation Rate in a Transitional Boundary Layer With a Free Stream Pressure Gradient", In: ASME Turbine Exposition 2002: Heat Transfer, Maufacturing Matrerials and Metallurgy, A ed., ASME, New York, USA, pp. 637-646.
Walsh, E. J. & M. Davies, 2002. "Entropy Generation Rate Measurement and Prediction: A Comparison on a Realistic Turbine Blade Profile", International Journal of Fluid Mechanics for Publication Walsh, E. J. & M. Davies, 2002. "Compressibility Effects on the Transition Region of a Turbine Blade Profile", ASME Journal of Fluids Engineering, vol. 127, no. 2, pp. 400-403
Walsh, E. J. & M.R.D. Davies, 2003. "The Measurement and Prediction of Boundary Layer Entropy Generation Rate", In: 2003 ASME International Mechanical Emgineering Congress and Exposition, 1 ed., ASME, New York, USA, pp. 249-258.
Walsh, E. J., P.A. Walsh, R. Grimes, & M.R.D. Davies, 2003. "On the Entropic Heating of Microfluidics for PCR Applications", In: ASME International Mechanical Engineering Congress and Exposition, 1 ed., ASME, New York, USA, pp. 33-36.
Walsh, E. J. & M. Davies, 2003. "Measurement and Prediction of Transition on the Suction Surface of Turbine Blade Profiles", Prague, Czech Republic.
Walsh, E. J. & M. Davies, 2003. "Compressibility Effects on the Entropy Generation Rate in Steady Adiabatic Transitional Boundary Layers", Prague.
Walsh, E. J., P. Samways, T. Dalton, & M.R.D. Davies, 2004. "Development of Opto-Electronic, Non-Contact Data Transmission Instrumentation", In: 1st EVI-GTI International Conference on Gas Turbine Instrumentation, Barcelona, Spain.
Walsh, E. J., M.R.D. Davies, & D.M. McEligot, 2004. "On the Use of Entropy to Predict Boundary Layer Stability", Journal of Entropy, vol. 6, no. 4, pp. 375-387
Walsh, P. & M.R.D. Davies, 2004. "The Design and Operation of a Continuous Flow Polymerase Chain Reaction Device for High Throughput Screening", 7th Annual Sir Bernard Crossland Symposium, Dublin.
Whelan, M. P., R.P. Kenny, T. Dalton, K. Oakley, & C.D. Hussey, 2000. "Novel Fibre-Optic Fluid Velocity Sensor", In: 14th International Conference on Optical-Fibre Sensors, 1 ed., Society of Photo-Optical Instrumentation Engineers, WA, USA, pp. 684-687.
